hero image
google color icon 4.9

Sump Pump Not Working? Common Causes

When a sump pump isn’t working, common causes include a power problem, a stuck or tangled float switch, a clogged intake screen or impeller, a frozen or blocked discharge line, and a failed or incorrectly installed check valve. In some cases, the pump is worn out or too small to keep up with the water coming in. Finding the cause early matters, since a sump pump that fails during heavy rain can quickly lead to basement flooding.

Safety first: before you touch the pump, clean the impeller, or reach into the pit, unplug the pump.

image

Why Is My Sump Pump Not Turning On? Check the Power First

Power problems are among the most common reasons a sump pump won’t turn on, so start there. Check that the pump is plugged in securely, that the outlet has power, and that the circuit breaker hasn’t tripped. A GFCI outlet that has tripped can also cut power to the pump without an obvious sign. Heavy rainfall often causes power outages, which can leave a basement unprotected just when the pump is needed most. A battery backup system can keep a pump running during an outage.

Is the Float Switch Stuck or Tangled?

The float switch is the part that tells the pump when to turn on and off, so when it jams, the pump may not start. It can get blocked by debris, caught on a cord, or wedged against the side of the pit. If the float is stuck in the “on” position, the pump will keep running and won’t shut off. A faulty float switch can also keep a pump running continuously even when it looks fine.

Are the Intake Screen and Impeller Clogged?

Debris blocking the intake screen can keep a pump from running properly. Small pebbles or debris can also get past the screen and jam the impeller, the set of spinning blades inside the pump. Clogged components can also cause a breaker to trip or a fuse to blow when the pump starts. Remember to unplug the pump before cleaning anything.

Is the Discharge Line Frozen or Blocked?

If the pump runs but water isn’t leaving the pit, the discharge pipe may be blocked by debris or frozen in cold weather. Check the point where the line exits your home. Air trapped in the discharge line can also block water flow even while the pump is running.

Has the Check Valve Failed?

A check valve is a one-way valve in the discharge pipe that keeps pumped water from flowing back into the pit. If the valve is faulty or was installed backwards, water can drain back into the pit, forcing the pump to run again and again and work harder than it should.

Is the Pump Worn Out or Too Small?

A pump that can’t keep up may be undersized for the amount of water, or it may be overwhelmed by very high groundwater. A noisy pump can point to worn bearings, debris in the pump, or a faulty impeller, and a failed motor can keep a pump from turning on at all. If you’ve checked the basics and the pump still isn’t working, it’s time to have a professional take a look.

Sump Pump Not Working: FAQs

Why is my sump pump humming but not pumping water?

A humming pump that isn’t moving water usually points to a blocked intake, a jammed impeller, a clogged or frozen discharge line, a failed check valve, or a failing motor.

Why is my sump pump running constantly?

Common causes include a stuck float switch, a failed check valve, very high groundwater, or a pump that is too small for the volume of water.

Why won’t my sump pump turn on?

Start with power: check that it’s plugged in, the breaker hasn’t tripped, and the GFCI outlet hasn’t tripped. If power is fine, the next suspects are a stuck float switch, a clogged intake, or a failed motor.

Will a sump pump work during a power outage?

A pump that depends on household power will stop working when the power goes out. A battery backup system can keep a pump running during an outage.

Sump Pump Help in Santa Cruz County

Redwood Pipe & Drain Inc helps homeowners throughout Santa Cruz County with sump pumps. If your pump isn’t working, or you want to be sure it’s ready before the next storm, we can help you figure out what’s going on and what to do about it.

Call Redwood Pipe & Drain Inc at (831) 706-5620, or request service online.

This article is for general informational purposes only and does not constitute professional plumbing or electrical advice. Always disconnect power before handling a sump pump, and contact a qualified professional if you are unsure how to safely inspect or repair yours. Specific repair recommendations, equipment, and pricing should be confirmed directly with Redwood Pipe & Drain Inc.
google color icon 4.9

Trusted by local homeowners and businesses for fast, reliable plumbing services-available when you need us most.

(831) 706-5620
Contact Us

need plumbing help? send us a message.